Addicore Pro Micro ATmega32U4 (Arduino Clone)

The Addicore Pro Micro has the ATmega32U4 MCU. It is fully Arduino compatible.
This is a clone of the Arduino Pro Micro with the ATmega32U4 MCU. This board utilizes the internal ATmega32U4 USB transceiver connected to an on-board micro USB connector to provide connectivity for programming. Product Contents: 1 — Pro Micro board with ATmega32U4 2 — 12 pin straight male headers Specifications: LEDs to indicate power, RX and TX Microcontroller ATmega32U4 at 16MHz Operating Voltage 5V Input Supply Voltage 5 - 12V Digital I/O Pins 12 (5 are PWM capable) Analog Input Pins 4 (can also be used as digital I/O pins) I/O Pin DC Current Capability 40mA Flash Memory 32kB SRAM 2.5kB EEPROM 1kB Clock Speed 16MHz Dimensions: Length 34mm (1.34) Width 18mm (0.71) Weight 5.37g (0.19oz)

This is a clone of the Arduino Pro Mini with the ATmega328P MCU., This board does not have a USB to UART/serial converter so you will need to use

ATmega328P Pro Mini

Pro Micro ATmega32U4 5V 16MHz Leonardo Arduino Compatible – Envistia Mall

running at 5V/16MHz Supported under IDE v1.0.1 On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os

OSOYOO Pro Micro 5V/16MHz Module Board with 2 Row pin Header Replace wit Pro Mini for Arduino

The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

Arduino 5V Micro with Headers

running at 5V/16MHz Supported under IDE v1.0.1 On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os

OSOYOO Pro Micro 5V/16MHz Module Board with 2 Row pin Header Replace wit Pro Mini for Arduino

Solution: Arduino Pro Micro (Clone) Port Not Detected – Eldontronics: Electronics Hobbyist

ATmega32U4 Mega32U4 5V 16MHz Module Pro Micro USB Controller Board for Arduino Nano Mini Leonardo ATMEGA32U4-AU with Bootloader: : Industrial & Scientific

DescriptionCytron Arduino Pro Micro Compatible w/ Pre-soldered HeadersComes with pre-soldered header pinsProvides Rx and Tx Hardware Serial

Cytron Arduino Pro Micro Compatible w/ Pre-soldered Headers

Pro Micro ATmega32U4 3.3V 5V Module Board for Arduino – diymore

Gowoops Micro Board, Leonardo Mini Controller 5V 16 MHz ATmega32u4 Module : Electronics

The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity

ATmega32U4 Pro Micro Controller Board for Arduino Pro Micro 5V Replace ATmega328