PoE Injector, PoE+ injector, PoE power injector

The Perle PINJ30 is a single port PoE mid-span injector fully compliant to PoE+ (30W of power) and PoE (15.4W of power)
PINJ130 - PoE Power Injector: One port 10/100/1000Base-T , 30 watts, IEEE 802.3at compliant. PoE+ and PoE compatible. EU AC Power cord included

Gigabit PoE+ Injector IEEE802.3at 30W

Rugged PoE Injector 30 Watts IP-30 Aluminum Housing 48V-56V DC DIN Rails. This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using a standard Ethernet cable. 30 Watt Power Budget Provides up to 30W of power (midspan) to IEEE 802.3af (PoE / Type 1) and IEEE 802.3at (PoE+ / Type 2) powered devices (PD) like: Cameras Sensors Wi-fi access points Uses Cat 5e (or higher rated) Ethernet cabling.

StarTech.com POEINJ30W Industrial Gigabit Ethernet PoE Injector 30W

Intellinet 1-Port Gigabit High-Power PoE+ Injector

TP-LINK 802.3af/at Gigabit PoE+ Injector Convert Non-PoE to PoE Adapter Auto Detects Required Power, up to 30W Plug & Play - Micro Center

Gigabit PoE+ Injector 30W 52V, Passive Power Over Ethernet PoE Adapter, Single Port PoE Power Injector for IP Camera Wireless/Wireless Access Point Long Range/IP Phones, EN30G : Electronics

ACTi PPOE-0106 High PoE Injector IEEE 802.3at Complian

The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.

30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE

Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable. Instantly upgrade your network gigabit switch to PoE/PoE+. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector.

24-Port Gigabit Rack Mount PoE Injector with 48 Volt 240 Watt Power Supplies

Designed specifically to meet the demand for high-power PoE devices

90/95W 802.3bt Power Over Ethernet Midspan Injector

30W 36W Gigabit PoE+ Injector Adapter Midspan IEEE 802.3af /at, 10/100/1000Mbps RJ45, 48V-55V PoE Ethernet Power Supply - AliExpress

Instantly upgrade your current network switch to PoE+. This PoE+ injector extends 52v Power over Ethernet up to 328 feet via ethernet cable. A passive PoE injector always delivers the same voltage as its power source. Power a USB-C tablet, IP security camera, VoIP desktop phone, WiFi access point, or other low voltage 802.3af device through a network data cable using this IEEE 802.3at compliant Power over Ethernet adapter / single port injector.

PoE Texas PoE Injector - Single Port PoE+ Power Over Ethernet PoE Adapter for 8023at - 101001000 Gigabit Data with Integrated 52V 30W Power Supply - P

DIGITUS by ASSMANN Shop Gigabit Ethernet PoE+ Injector, 802.3at, 30 W

This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable,

1-Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af