STL file Logitech G29 - G920 - G923 Levers for L2 and R2 🛞・Model

€ 16.99 · 4.8 (221) · In Magazzino

I have a Logitech G29 and I found that reaching the L2 and R2 buttons is difficult when racing and you cannot watch at the steering wheel. So I decided to design some little levers that will go on those buttons, making them easier to reach while playing! The model is made so you don
I have a Logitech G29 and I found that reaching the L2 and R2 buttons is difficult when racing and you cannot watch at the steering wheel. So I decided to design some little levers that will go on those buttons, making them easier to reach while playing! The model is made so you don't have problems pressing the L2 and R2 buttons, and has a little cut-out in the top so you don't have problems also pressing the Down arrow key on the left and the X (or A) button on the right. To use it, you have to unscrew 2 screws on the steering wheel, and place the lever there. It's a simple and fast installation, and you will be ready to play again in 1 minute or less! There are 3 models for each button. For the L2 button I made a clear lever without any text on it, one with just the L2 text, and one with the L2 DRS text on, in order to use it with games like F1 2020. For the R2 button I made also a clear lever, one with just the R2 text, and one with R2 PIT text on. If you want other on them, like text or icons, just send me a message and I'll add that .slt file. You can print it with just one color, or use the filament change feature of your printer to print them in 2 colors like I did. As you can see in the photos, I printed some black with the red text, some black with the green text, and some all black. You just need to print the first few layers in the color you want on the front, and the rest of the model with the color you want on the text. The little hole will be filled with the second color you use! To print this you don't need supports in the holes. I put in it a little layer so it will bridge and print the model without problems. Just use your printer pliers to remove those lines after the print is done, and you will be ready to put them on the steering wheel!